CyberHome Entertainment CH-DVD 452 Manuel d'utilisateur télécharger pdf (Page 17)

Television connections

In order to use your DVD player, you will need to make a video connection to

your TV. The capabilities of your TV and the cables you have on hand will deter-

mine the connections you can use. There are four possible connection types:



Composite video - The most widely used connection. An audio/video

cable for composite video is required.



RGB (over Scart) - Audio and video connection which enables an optimal

picture quality. This connection possibility requires a Scart cable (optional-

ly included in your accessory).



S-Video - A higher quality connection that requires a special S-Video cable

and a S-Video capable TV.



Component Video & Progressive Scan - The highest quality video con-

nection. Supported on high-end TVs or beamers and requires a special

cable.

In detail:

Audio/Video connection to a TV with Composite V

ideo and

Stereo Audio input

If your TV has only a single Video input jack, typically a yellow-coloured plug,

you will use the composite video output of your DVD player for the video con-

nection. For the audio connection you can use the red and white stereo audio

in connectors of your TV.

Have the following cable ready:

1. Audio/Video cable (optionally supplied; red, white and yellow plug)

1. Use the audio/video cable optionally included in your accessory to connect

the video output of your DVD player to the video input of your TV. This is

normally a yellow-coloured connector that matches the video output on the

back of this unit.

AUDIO AND VIDEO CONNECTIONS

Composite video

input jack



RED

YELLOW

WHITE

VIDEO INPUT

STEREO AUDIO INPUT

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Pas de commentaire

CyberHome Entertainment CH-DVD 452 Manuel d'utilisateur Page 17