CyberHome Entertainment CH-DVD 452 Manuel d'utilisateur télécharger pdf (Page 23)

Powering on the unit

Only after all connections are complete, connect the power cord and power on

the unit.

1. Plug the standard electrical plug into a wall socket or power strip.

2. The unit is now in Standby mode. Press the button “ON/STANDBY” on the

front panel or the button “POWER” on your remote control to power the

device on. Once the unit has been turned on, the unit will always be either

ON or in standby mode.

3. When the screen display indicates “Loading”, the disc is read.

4. If no disc is inserted, the screen display will indicate “No disc”.

Inserting a disc

1. Press the Open/Close button “K” on the front panel or on the remote con-

trol to open the tray. The screen display will indicate “Open”.

2. Carefully place the disc in the tray with the label facing up. Be careful not to

touch the playing surface. Hold the disc by the sides and with your fore fin-

ger through the hold in the middle and insert gently into the tray. Carefully

place the disc in the tray

3. Press the button “A” or “K” on the front of the device or on the remote

control to close the tray. The screen display shows “Close” and then

“Loading”. The information on the disc is read.

4. The inserted disc type is indicated on the screen. If the disc supports the

Auto Play function, playback will begin automatically.

GETTING STARTED

Notes on power states

There are three power states for this unit:

• OFF - The unit is not plugged into a wall outlet. The unit draws no power.

• STANDBY - The unit is plugged into a wall outlet. The unit has not been

taken out of standby by pressing either the button “ON/STANDBY” on the

front panel or the button “POWER” on the remote control. The unit draws

a slight amount of power to enable the remote control receiving circuit. The

standby LED is glowing red.

• ON - The unit is plugged into wall outlet and either the button “ON/STAND-

BY” on the front panel or the button “POWER” on the remote control has

been pressed. The unit is ready to use.

POWER

PBC

DISPLAY

GOTO

MUTE

AUDIO

SUBTITLE

ANGLE

PROGRAM

TITLE

OPEN/CLOSE

SETUP

How to insert a double-sided DVD?

Double-sided discs do not have labelling over the whole surface. The

labelling for both side is in the centre of the disc. To play a side its label must

be facing up.

Labeling Side

Surface

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

CyberHome Entertainment CH-DVD 452 Manuel d'utilisateur Page 23

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD CyberHome Entertainment CH-DVD 452